The most probable issues that could make a motor not turn would be:
First. Broken security unbiased switch, free or consumed battery links, drained battery or alert is on.
First. Set the crisis brake. Connect with hand brake, on the off chance that you are driving a programmed transmission vehicle, put it in “P”. On the off chance that you are driving a manual stuff, connect with first stuff. This activities will keep your vehicle from moving away when you really take a look at the motor’s issue.
Second. On a vehicle with a programmed transmission, turn the key while holding the gearshift switch immovably in the recreation area position. In the case of nothing occurs, attempt once more with the switch in nonpartisan position. In the event that utilizing a manual transmission, make certain to push down the grasp pedal the entire way to the floor. In the event that the vehicle fires up after any of these means, a broken security nonpartisan switch causes the issue. Assuming the motor won’t start, eliminate the keys from the start and follow these subsequent stages. In specific vehicle makes (age four years of age), a hand-off might be important to communicate better current voltage to begin the vehicle.
Third. Ensure the battery links have previously been fix. While fixing the positive link, guarantee that you are not contacting any metal while the wrench is associated with the link. This will help abstain from curving, which could harm the battery. Shortcircuits will occur if you don’t watch out.
Fourth. Pay special attention to erosion where the battery links interface with the battery. Assuming you see indications of erosion, eliminate the battery links starting with the positive side. Clean both within the link end and the battery post utilizing a wire battery brush. Pour heated water to clear any white solidified powder. Apply oil to postpone the arrangement of white powder. The powder will restrict the full contact between the wire links and the battery. Don’t reconnect the positive link until the negative side of the battery has been cleaned.
Fifth. Reconnect the red battery link to the battery post set apart with a “or more” (+) image. Typically set apart in red.
6th. In the event that you have a caution framework fitted to your vehicle, keep the vehicle alert controller close to you. After interfacing, you many need to deactivate your alert when you reconnect your battery. Reconnect the dark negative link to the battery post set apart with the ‘short’ (- ) image. In the wake of finishing these means, turn over the motor. Assuming the motor actually won’t turn over, the battery should be kicked off.
